Laser Ninja Keyboard Stands

The Laser Ninja Keyboard Stands are constructed out of thick 6mm acrylic with a high level of attention to detail. The stands are held together using heavy duty thumb screws and nuts and allow for a sturdy medium in which your keyboards can be showcased. Laser Ninja has also made sure that the stands remain incognito enough to not take away from the displayed keyboard, which is the main show piece.

Specifications

Dimensions: 210mm Wide x 143mm Deep
Material: 6mm matte frosted acrylic

Keyboard support

Anything wider than 21cm is supported, which generally means layouts above 50%. In terms of weight, basically anything on the market - the heaviest board tested was over 7kg.

Material and finish

The acrylic is clear with a silky smooth satin/frosted texture on both sides, that resists dust and fingerprints. This blends into the background so the focus is all on the keyboard.

Rubber feet

Custom cut clear 3M rubber feet are pre-applied on each stand, including where the keyboard rests. They are practically invisible.

Toolless assembly

Quick and easy assembly using the thumbscrews and nuts, no tools needed. A spare of each is included.

Attachments

Lastly is the rail system along the middle piece, the holes and notches are designed for future attachments. Examples include support for split boards, floating nameplate and holding other devices.

Packaging

The packaging has been refined to waste as little space as possible, which reduces weight and freight costs, while maintaining good protection. Hardware comes in a small zip lock bag that can be reused (just peel the vinyl label off).